|
HOFLAND
UNIVERSAL
[spec sheet] |
|
|
Description: |
A
high quality jointing for virtually any demanding sealing duty
involving oils, fuels, chemicals, refrigerants and steam. |
|
Standard
compliance: |
DIN
3754 it 400
|
|
BS: |
1832:1991
A&O |
|
Colour |
Blue |
|
Max
Temp: |
recommended:
510°C |
|
Max
Pressure: |
100
Bar |
| |
|
HOFLAND
100
[spec sheet] |
|
|
Description: |
Medium
grade CAF for general purpose including low pressure steam,
water, inert gasses and non-aggressive media.
|
|
Standard
compliance: |
Commercial
Quality |
|
BS: |
n/a |
|
Colour |
Red |
|
Max
Temp: |
Recommended:
370°C |
|
Max
Pressure: |
35
Bar |
| |
|
HOFLAND
400
[spec sheet] |
|
|
Description: |
For
water, superheated and saturated steam, mild chemicals, petrol
and oils.
|
|
Standard
compliance: |
DIN
3745 it 400
|
|
BS: |
1832:1991
A&O |
|
Colour |
Red/Black
|
|
Max
Temp: |
Recommended:
510°C
|
|
Max
Pressure: |
100
Bar
|
| |
|
HOFLAND
WIRE
[spec sheet] |
|
|
Description: |
For
arduous applications involving fluctuating temperatures and
pressures. The inclusion of steel wire gauze reinforces
it against physical breakdown and contributes to bolt torque
retention. |
|
Standard
compliance: |
DIN
3754 it 400
|
|
BS: |
1832:1991
A&O |
|
Colour |
Black |
|
Max
Temp: |
Recommended:
540°C |
|
Max
Pressure: |
200
Bar |
| |
|
HOFLAND
ACID
[spec sheet] |
|
|
Description: |
Acid
resistant jointing for most acid services.
|
|
Standard
compliance: |
DIN
3754 it
|
|
BS: |
1832:1991
A&O |
|
Colour |
Off
white |
|
Max
Temp: |
Recommended:
120°C |
|
Max
Pressure: |
8
Bar |
|
Non-Asbestos
Based Products
|
|
BA
203
[spec sheet] |
|
|
Description: |
Aramide
fibres with Nitrile binder. Oil resistant gasket
material for medium to higher loadings. Economical high
grade quality jointing with good resistance to water gases,
oils and fuels.
|
|
Max
Temp: |
Recommended:
250°C |
|
Max
Pressure: |
50
Bar |
| |
|
BAM
6000 [spec
sheet] |
|
|
Description: |
BAM
6000 is a first-rate gasket material based on a combination of
aramide fibres and non-hazardous biosoluble mineral wool
fibres. Due to its superior resistance to steam and long-term
steam sealability BAM 6000 is particularly recommended
for all applications where thermal cycling, saturated or
overheated steam are applied, eg. Heat exchangers, boilers,
radiators, steam supply, power generation, etc. It can
also be used for sealing oils, fuels, gases, Freons, solvents
and non-aggressive chemicals.
|
|
Max
Temp: |
Recommended:
440°C |
|
Max
Pressure: |
120
Bar |
| |
|
BA-C
[spec
sheet] |
|
|
Description: |
Aramide
fibres with CSM (Hypalon) binder. Fairly soft gasket
material for different aggressive media and with very good
chemical resistance to acids and alkaline media.
|
|
Max
Temp: |
Recommended:
200°C |
|
Max
Pressure: |
60
Bar |
|
