Packing
|
ISOPAK
Expanded
Graphite Packing |
|
|
Description: |
The
sealing product is made of ISOPAK , braided into
flexible packing. It can be used to seal hot water, high
temperature and pressure steam, heat transfer fluid, hydrogen
gas, ammonia, organic solvents, hydrocarbons, cryogenic
liquids, etc, except fewer strong oxidizer. It is a
unique and universal sealing product. |
|
Temperature: |
1650
degC Non Oxidizing Condition
650 degC Steam
450 degC Oxidizing Condition
-204 degC Cryogenics |
|
Pressure: |
9
- 45 Mpa |
|
Velocity: |
2
- 15 m/s |
|
PH
Range: |
0
- 14 |
|
|
|
| |
|
ISOPAK
Expanded Graphite with Inconel Wire |
|
picture
|
Description: |
This
sealing product offers an innovative expanded pure graphite
yarn with inconel wire reinforcement, braided into a flexible
and high strength packing. It can be used to seal hot
water, high temperature and pressure steam, heat transfer
fluid, hydrogen gas, ammonia, etc, except fewer strong
oxidizer. |
|
Temperature: |
1000
degC Non Oxidizing Condition
650 degC Steam
450 degC Oxidizing Condition
-204 degC Cryogenics |
|
Pressure: |
9
- 45 Mpa |
|
Velocity: |
2
- 15 m/s |
|
PH
Range: |
0
- 14 |
|
|
|
|
|
|
ISOPAK Pure PTFE Fiber |
|
|
Description: |
This
packing is made of pure PTFE yarn, there are no PTFE latex or
lubricants. It is suitable for shafts and stuffing
boxes because of its flexibility. Recommended for
IC related lines, fine-chemicals, foods, pharmaceuticals where
contamination is not allowed. |
|
Temperature: |
-200
degC to 270 degC |
|
Pressure: |
100
bar |
|
Velocity: |
10
m/s |
|
PH
Range: |
0
- 14 m/s |
| |
|
ISOPAK Kevlar Fiber
Packing |
|
picture
|
Description: |
Kevlar
fiber-braided packing is made of Du Pont's Kevlar impregnated PTFE
dispersion and processed with lubricant, braided
into square cross section. It can be installed separately
or as end rings with other kinds of packing to combine
different characteristics into packing sets. It is usually
applied to pulp factory, sand slurry, tin mine and feed water
pump or power. |
|
Temperature: |
-200
degC to 280 degC |
|
Pressure: |
200
bar |
|
Velocity: |
25
m/s |
|
PH
Range: |
2
- 13 |
| |
|
ISOPAK
PTFE with Graphite
Packing |
|
picture
|
Description: |
ISOPAK is made up of PTFE yarn containing graphite
particles and silicone lubricant. It has a low coefficient of
friction, great tear resistance and high thermal conductivity
resulting in good stability and long service. It is used
to seal pump
shafts, water, steam, solutions for agitators, mixers, and
vorticular machines. |
|
Temperature: |
280
degC |
|
Pressure: |
100
bar |
|
Velocity: |
20
m/s |
|
PH
Range: |
0
- 14 |
|
|
|
Page Keywords: ISOPAK, Chinaflex, packing, packaging, Non Oxidizing Condition, Steam, Oxidizing Condition, Cryogenics,
graphite packing, kevlar packing, PTFE, pumps.
|
